|
1 | Eye Detection Using Composite Cross-correlation | 2013 | American Journal of Applied Science | Scopus | Co-Author |
2 | Managing Multimedia Data: A Temporal-Based Approach | 2012 | Int. Journal of Multimedia and Ubiquitous Engineering | Scopus | Co-Author |
3 | The Effects of Different Grades of Hob Cutter in Determining Gear Tooth Accuracy | 2012 | Advanced Science Letters | Scopus | Co-Author |
4 | Strengthening of Islamic Quality Management Practices Through Culture of Perfection (ITQAAN) and the Value of Courtesy (IHSAN) Toward The Business Performance of Muslim Entrepreneur, | 2014 | Advances in Natural and Sciences | Other Index | Co-Author |
5 | Strategic Human Resource for Lean Management involving Quality and Operational Performance,, | 2014 | Australian Journal of Basic and Applied Sciences | Other Index | Co-Author |
6 | A Review on Intelligence STEP-NC Data Model and Function Bloks CNC Machining Protocol | 2014 | Advanced materials Research, | Other Index | Main Author |
7 | Islamic Quality Management Toward Business Operation of Malaysian Moslem Entrepreneurs | 2014 | Journal of Basic and Applied Scientific Research | Other Index | Co-Author |
8 | Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by Using CAD Software | 2014 | Materials Science Forum | Other Index | Co-Author |
9 | A Novel Approach to Signal Encryption: Improved Version of Conventional DSSS Scheme | 2011 | Advanced Science Letters | Other Index | Co-Author |
10 | A cell management system to support robotic assembly | 2001 | International Journal of Advanced Manufacturing Technology | Scopus | Main Author |
11 | The effect of surface texture and carbonaceous material composition on the dielectric properties measurement of coconut shell-polymer (CSP) composites | 2016 | ARPN Journal of Engineering and Applied Sciences | Scopus | Co-Author |
12 | Cost evaluation on performance of a PVD coated cutting tool during end-milling of Inconel 718 under MQL conditions | 2016 | Transactions of the Institute of Metal Finishing | WoS Q4 | Main Author |
13 | A Systematic Review on Informal Learning of English Language via Facebook | 2016 | ARAB WORLD ENGLISH JOURNAL | ESCI | Co-Author |
14 | PREDICTION OF CUTTING FORCE IN END MILLING OF INCONEL 718 | 2014 | Journal of Engineering and Technology | Other Index | Co-Author |
15 | Disputes Upon Sabah: Clans Claims and Malaysian Sovereignty | 2014 | International Journal of Asian Social Science | Other Index | Co-Author |
16 | SNR improvement and bandwidth optimization technique using PCM-DSSS encryption scheme | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
17 | A comparative study on different baits used to attract house fly in Malaysia | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
18 | Improvement of surface finish by multiple piezoelectric transducers in fused deposition modelling | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Main Author |
19 | Advanced manufacturing of an aircraft component (fish-head): A technology review on the fabrication | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Main Author |
20 | Development of standard approach for sickle blade manufacturing | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
21 | Considering philosophical underpinnings and ensuring the trustworthiness of an ethnographic research: A personal choice | 2016 | Man in India | Scopus | Co-Author |
22 | A review of key principles in halal manufacturing | 2016 | International Journal of Applied Business and Economic Research | Scopus | Main Author |
23 | Analysis of persuasive elements in multi - Level marketing official websites | 2016 | International Journal of Applied Business and Economic Research | Scopus | Co-Author |
24 | Rhetoric and health: How fitness trainers persuade public on a social networking site? | 2016 | Man in India | Scopus | Co-Author |
25 | Human emotion detection via brain waves study by using electroencephalogram (EEG) | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
26 | Reason maintenance in product modelling via open source CAD system | 2016 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
27 | The Tasks of Individuals Practicing Human Factors and Ergonomics | 2016 | Journal of Ergonomics | Other Index | Co-Author |
28 | Identification and comparative analysis of essential performance indicators in two levels of soccer expertise | 2017 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Co-Author |
29 | Speaker independent speech recognition of isolated words in room environment | 2017 | International Journal on Advanced Science, Engineering and Information Technology | Scopus | Main Author |
30 | Evaluation of Hygienic Condition of Chinese Electronic Fly Catcher Trap Bait Using Microbiological Approach | 2017 | International Journal of Scientific Engineering and Applied Science | Other Index | Main Author |
31 | Improving oil classification quality from oil spill fingerprint beyond six sigma approach | 2017 | Marine Pollution Bulletin | WoS Q1 | Co-Author |
32 | Developing speaking skills using virtual speaking buddy | 2017 | International Journal of Emerging Technologies in Learning | ESCI | Co-Author |
33 | Sustainable manufacturing practices in Malaysian palm oil mills: Priority and current performance | 2017 | Journal of Manufacturing Technology Management | ESCI | Main Author |
34 | Simulation analysis and electromagnetic dosimetry of patch antenna on HUGO voxel model | 2017 | Journal of Telecommunication, Electronic and Computer Engineering | Scopus | Co-Author |
35 | Edges trimming parameter optimizations of hybrid composite CFRP/AL2024 | 2017 | Journal of Engineering and Applied Sciences | Scopus | Main Author |
36 | Effective Time Duration of Chinese Electronic Fly Catcher Trap Bait on the Best Performance | 2017 | International Journal of Scientific Engineering and Applied Science | Other Index | Main Author |
37 | Determining optimum electro discharge machining parameters for drilling of a small hole by utilizing taguchi method | 2014 | Applied Mechanics and Materials | Other Index | Co-Author |
38 | Design Improvement of Automatic Transmission System for Remote Controlled Car | 2014 | Applied Mechanics and Material | Other Index | Co-Author |
39 | Machining Parameters Optimization for Trimming Operation in a Milling Machine Using Two Level Factorial Design | 2015 | Applied Mechanics and Materials | Other Index | Main Author |
40 | AN INTELLIGENT LIGHTING CONTROL SYSTEM (ILCS) USING LABVIEW | 2017 | Journal of Fundamental and Applied Sciences | ESCI | Main Author |
41 | Effect of Vacuum Assisted Fused Deposition Modeling on 3D Printed ABS Microstructure | 2017 | International Journal of Applied Engineering Research | Scopus | Main Author |
42 | A systematic review of unconventional advertising strategies for business proliferation | 2017 | International Journal of Applied Business and Economic Research | Scopus | Co-Author |
43 | Mathematical Analysis of Retirement Income Benefit Based on Annuitization Approach | 2017 | International Journal of Academic Research in Business and Social Sciences | ERA | Co-Author |
44 | The impact of advertisements on the conceptualisation of ideal female beauty: A systematic review | 2017 | Man in India | Scopus | Co-Author |
45 | VACUUM FUSED DEPOSITION MODELLING SYSTEM TO IMPROVE TENSILE STRENGTH OF 3D PRINTED PARTS | 2017 | Journal of Fundamental and Applied Sciences | ESCI | Main Author |
46 | EXISTING SHARIAH MODEL OF ISLAMIC HOME LOAN FINANCING: WEAKNESS AND STRENGTHEN | 2017 | International Journal of Advanced Engineering and Management Research | Other Index | Co-Author |
47 | VirSbud: Key characteristics, applications, and its future | 2017 | International Journal of Interactive Mobile Technologies | Scopus | Co-Author |
48 | Performance Comparison and Electromagnetic Dosimetry of Rigid, Hybrid and Textile Antennas | 2017 | Advanced Science Letters | Scopus | Co-Author |
49 | Analysis Awkward Posture at Food Production Activity using RULA Assessment | 2018 | Journal of Fundamental and Applied Sciences | Other Index | Main Author |
50 | FEASIBILITY STUDY OF VACUUM TECHNOLOGY INTEGRATED FUSED DEPOSITION MODELING TO REDUCE STAIRCASE EFFECT | 2018 | Journal of Fundamental and Applied Sciences | Other Index | Main Author |
51 | KEY PERFORMANCE INDICATORS FOR MEASURING SUSTAINABILITY IN HEALTH CARE INDUSTRY IN MALAYSIA | 2018 | Journal of Fundamental and Applied Sciences | Other Index | Main Author |
52 | Integrated Interface development environment using STEP Universal Data Structure | 2018 | International Journal of Engineering and Technology(UAE) | Scopus | Main Author |
53 | Konsep Asas dan Prinsip Pembuatan Menurut Islam | 2018 | Jurnal Islam dan Masyarakat Kontemporari | Other Index | Main Author |
54 | DMAIC Six Sigma Methodology in Petroleum Hydrocarbon Oil Classification | 2018 | International Journal of Engineering & Technology | Scopus | Co-Author |
55 | Network Quality Assesment of Wireless Communication Based on Mobility Issue | 2018 | INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION | Other Index | Main Author |
56 | PROCESSING AND PROPERTIES OF Ni/YSZ COMPOSITE COATING ON HIGH SPEED STEEL CUTTING TOOL | 2018 | Journal of Fundamental and Applied Sciences | Other Index | Main Author |
57 | EFFECT OF MULTIPLE PIEZOELECTRIC TRANSDUCER ON FUSED DEPOSITION MODELING TO IMPROVE PARTS SURFACE FINISH | 2018 | Journal of Advanced Manufacturing Technology | Scopus | Main Author |
58 | Cooling Effect Efficiency Prediction of Aluminum Dimples Block using DOE Technique | 2018 | International Journal of Engineering & Technology | Other Index | Main Author |
59 | Experimental Analysis on Parameters Affecting the Material Removal Rate in Wire Electrical Discharge Turning using the Taguchi Method | 2018 | International Journal of Mechanical & Mechatronics Engineering | Other Index | Main Author |
60 | Analysis of the Acceptance of Newly Constructed Takaful Education Plan for Learning Disabled Children among Public | 2018 | International Journal of Academic Research in Business and Social Sciences | ERA | Co-Author |
61 | MECHANICAL PROPERTIES OF BONE SCAFFOLD PROTOTYPES FABRICATED BY 3D PRINTER | 2018 | Journal of Engineering Science and Technology | Scopus | Main Author |
62 | Investigation of surface topology in ball nose end milling process of Inconel 718 | 2019 | Wear | WoS Q1 | Main Author |
63 | Effect of alkaline treatment on structural characterisation, thermal degradation and water absorption ability of coir fibre polymer composites | 2019 | Sains Malaysiana | WoS Q4 , MyCite | Co-Author |
64 | The construction of a new mathematical model for islamic home financing | 2019 | Asian Academy of Management Journal | ESCI , MyCite | Co-Author |
65 | Identifying Key Performance Indicators for Manufacturing Industries Bumiputera Entrepreneurs (MIBE) in East Coast Malaysia | 2019 | International Journal of Research and Innovation in Social Science | Other Index | Main Author |
66 | The effects of dry and chilled air on tool wear behavior during face milling of Inconel 718 | 2019 | Jurnal Tribologi | ESCI | Main Author |
67 | The Effects of Indentation Loading Force and Number of Indentations on the Micro Hardness Variation for Inconel 718 | 2019 | International Journal of Recent Technology and Engineering (IJRTE) | Scopus | Main Author |
68 | Multi-Response Optimization of Process Parameter in Fused Deposition Modelling by Response Surface Methodology | 2019 | International Journal of Recent Technology and Engineering (IJRTE) | Scopus | Main Author |
69 | Effectiveness Test on Hardness Performance of Plastic Waste and Sawdust Composite | 2019 | International Journal of Recent Technology and Engineering | Other Index | Main Author |
70 | A novel maximum power point tracking algorithm for wind energy conversion system | 2019 | Engineering Letters | ESCI | Main Author |
71 | The Crux of the Government Support to the Bumiputra Entrepreneurs | 2018 | International Journal of Academic Research in Business and Social Sciences | ERA | Co-Author |
72 | Measuring the Performance Index of Bumiputra Entrepreneurs Receiving Government Support | 2018 | International Journal of Academic Research in Business and Social Sciences | ERA | Co-Author |
73 | Effect of standoff distance on the kerf characteristic during abrasive water jet machining | 2020 | Results in Engineering | Scopus | Main Author |
74 | Evaluation effect of process parameter plastic waste and sawdust composition material fatigue test | 2020 | Test Engineering and Management | Scopus | Main Author |
75 | Coconut shell, coconut shell activated carbon and beta-silicon carbide reinforced polymer composite: An alternative dielectric material for wireless communication application | 2020 | Bulletin of Electrical Engineering and Informatics | Scopus | Co-Author |
76 | Investigate the effect of pyrolysis processing parameters toward the production of biofuel using pp and hdpe as a plastic waste materials | 2020 | Journal of Advanced Research in Dynamical and Control Systems | Scopus | Main Author |
77 | A sustainable dairy goat housing design using composite material for domestic farming in Malaysia | 2020 | International Journal of Advanced Science and Technology | Scopus | Co-Author |
78 | Banana fibres as potential reinforcing agent in polymer matrix: Mechanical and thermal analysis | 2020 | International Journal of Advanced Science and Technology | Scopus | Co-Author |
79 | File and PC-Based CNC Controller using Integrated Interface System (I2S) | 2020 | Journal of Advanced Research in Applied Mechanics | Other Index | Main Author |
80 | THE IMPACT OF PERSONAL, TRAINING, SUPPORT, SUPERVISORAND ORGANIZATION MANAGEMENT ON JOB PERFORMANCE AMONG YOUNG ENGINEERS AT WORKPLACE | 2020 | JOURNAL OF ADVANCE RESEARCH IN DYNAMICAL & CONTROL SYSTEMS | Scopus | Co-Author |
81 | Effect of brown gas (Hho) converter design on the production of hydrogen and oxygen gas using water electrolysis method | 2020 | Journal of Advanced Research in Dynamical and Control Systems | Scopus | Main Author |
82 | Crushing behaviour of plain weave composite hexagonal cellular structure [Sifat penghancuran struktur sel heksagon komposit tenun biasa] | 2020 | Sains Malaysiana | WoS Q4 , MyCite | Main Author |
83 | Learning Experience of Machining Carbon Fibre CFRP AL2024 Using Design of Experiment (DoE) Approach | 2020 | International Journal of Advanced Research in Engineering Innovation | Other Index | Main Author |
84 | A short review on rans turbulence models | 2020 | CFD Letters | Scopus | Main Author |
85 | Seasonal Flood Monitoring and Management of UAV's Images-A Review | 2017 | JOURNAL OF APPLIED SCIENCES RESEARCH | Other Index | Co-Author |
86 | INNOVATIVE DESIGN DEVELOPMENT OF ERGONOMIC ABLUTION STATION FOR WHEELCHAIR USER | 2020 | PalArch's Journal of Archaeology of Egypt/Egyptology | Other Index | Co-Author |
87 | A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE) | 2021 | Nanotechnology Reviews | Scopus | Main Author |
88 | The development of methodology for tool path generation using STEP data model based on ISO 6983 | 2021 | International Journal of Engineering Trends and Technology | Scopus | Main Author |
89 | The application of UAV images in flood detection using image segmentation techniques | 2021 | Indonesian Journal of Electrical Engineering and Computer Science | Scopus | Co-Author |
90 | Design and fabrication of a PC-based 3 axis CNC milling machine | 2021 | International Journal of Engineering Trends and Technology | Scopus | Main Author |
91 | Characterization of Crude Palm Oil (CPO), Corn Oil and Waste Cooking Oil for Biodiesel Production | 2021 | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | Scopus | Main Author |
92 | Support vector machines for oil classification link with polyaromatic hydrocarbon contamination in the environment | 2021 | Water Science and Technology | WoS Q3 | Co-Author |
93 | Effect of Electrode Plates on the Engine Performance and Gas Emissions of a Four-Stroke Petrol Engine | 2022 | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | Scopus | Main Author |
94 | Effect of Abrasive Water Jet Turning AWJT Parameter Setting on Surface Finish of Inconel 718 | 2022 | International Journal of Nanoelectronics and Materials | Scopus | Co-Author |
95 | Tool Path Generation for Linear Cutting Using Step File (ISO 10303) Data Structure | 2021 | International Journal of Advanced Research in Technology and Innovation | Other Index | Co-Author |
96 | Adaptive Initial Contour and Partly-Normalization Algorithm for Iris Segmentation of Blurry Iris Images | 2022 | Journal of Information and Communication Technology | ESCI , Scopus | Co-Author |
97 | Efficient, accurate and fast pupil segmentation for pupillary boundary in iris recognition | 2023 | Advances in Engineering Software | WoS Q2 , Scopus | Main Author |
98 | Design and Structural Analysis of 3-Axis CNC Benchtop Milling Machine | 2022 | International Journal of COMADEM | Scopus | Main Author |
99 | Application of Modular Fixture Interface in CAD Software for Jigs and Fixtures Design Teaching Aids | 2023 | Journal of Advanced Research in Applied Sciences and Engineering Technology | MyCite , Scopus | Co-Author |
100 | Design and Development of 3-Axis Benchtop CNC Milling Machine for Educational Purpose | 2023 | International Journal of Integrated Engineering | ESCI , MyCite , Scopus | Main Author |
101 | Application of Artificial Intelligence in Marine Corrosion Prediction and Detection | 2023 | Journal of Marine Science and Engineering | WoS Q1 , Scopus | Main Author |
102 | Milling Features Recognition Methodology of Rectangular Fillet Blind Pocket for Universal Data Structure | 2023 | Journal of Advanced Research in Applied Sciences and Engineering Technology | Scopus , MyCite | Co-Author |
103 | Influence of TiF3 catalyst on the enhancement of hydrogen storage properties of Mg-Na-Al-Li-B composite system | 2023 | Journal of Energy Storage | WoS Q1 , Scopus | Co-Author |
104 | Development of the PC-based Integrated Interface System of STEP file for CNC Machining Application: Circular Features | 2020 | International Journal of Integrated Engineering | Scopus , MyCite | Main Author |
105 | G-code converter using interface system for a STEP file (ISO 10303) | 2023 | Indonesian Journal of Electrical Engineering and Computer Science | Scopus | Main Author |
106 | The Potential of Agricultural Waste Fibres as Bio-Conductive Filler in Epoxy Based Polymer | 2022 | EnvironmentAsia | Scopus | Co-Author |
107 | The effect of pulsating lubrication method on rake face cutting tool during end milling of inconel 718 | 2023 | Results in Engineering | Scopus , ESCI | Co-Author |
108 | Simulation Study on Structure Bumper Beam using Finite Element Analysis | 2022 | International Journal of Nanoelectronics and Materials | Scopus | Co-Author |
109 | Recent Advances on Mg–Li–Al Systems for Solid-State Hydrogen Storage: A Review | 2022 | Frontiers in Energy Research | Scopus , WoS Q2 | Co-Author |
110 | Oxyhydrogen Gas Production by Alkaline Water Electrolysis and the Effectiveness on the Engine Performance and Gas Emissions in an ICEs: A Mini-Review | 2022 | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | Scopus | Co-Author |
111 | Metaheuristic nature-inspired algorithms for reservoir optimization operation: a systematic literature review | 2022 | Indonesian Journal of Electrical Engineering and Computer Science | Scopus | Main Author |
112 | Integrated Interface System of STEP Data Models for the Tool Path Generation | 2022 | International Journal of Integrated Engineering | Scopus , WoS Q1 | Main Author |
113 | Advancements in CNC Machining: Rectangular Boss Feature Validation and Toolpath Precision using STEP AP242 and B-Rep Data Structure | 2024 | Journal of Advanced Research in Applied Mechanics | Scopus , MyCite | Co-Author |
114 | Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing | 2024 | Journal of Advanced Research in Applied Sciences and Engineering Technology | Scopus , MyCite | Co-Author |
115 | Machining surface quality evaluation of Inconel 718: a comparative study of various coolant and lubrication strategies in milling process | 2023 | Jurnal Tribologi | ESCI , Scopus , MyCite | Co-Author |
116 | A Review Of Predictive Maintenance Approaches For Corrosion Detection And Maintenance Of Marine Structures | 2024 | Journal of Sustainability Science and Management | Scopus , MyCite | Main Author |
117 | Towards Sustainable Food Packaging: A Review of Thermoplastic Starch (TPS) as a Promising Bioplastic Material, its Limitations, and Improvement Strategies with Bio-fillers and Essential Oils | 2024 | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | MyCite , Scopus | Co-Author |
118 | A brief review of ultrasonic assisted milling of Inconel 718 | 2024 | Jurnal Tribologi | WoS Q3 , Scopus , MyCite | Co-Author |
119 | Design and Development of a Universal Magnetic Portable Jig: A Modular Approach for Versatile Clamping Applications | 2025 | Journal of Advanced Research Design | Scopus , MyCite | Co-Author |
120 | Optimisation of Structural Design in Benchtop CNC Milling Machines for Enhanced Performance and Efficiency | 2025 | Journal of Advanced Research in Applied Mechanics | Scopus , MyCite | Co-Author |